CustomGBForce

class OpenMM::CustomGBForce

This class implements complex, multiple stage nonbonded interactions between particles. It is designed primarily for implementing Generalized Born implicit solvation models, although it is not strictly limited to that purpose. The interaction is specified as a series of computations, each defined by an arbitrary algebraic expression. It also allows tabulated functions to be defined and used with the computations. It optionally supports periodic boundary conditions and cutoffs for long range interactions.

The computation consists of calculating some number of per-particle

When specifying a computed value or energy term, you provide an algebraic expression to evaluate and a

  • System. In the case of a computed value, this means the value for a particle depends only on other properties of that particle (its position, parameters, and other computed values). In the case of an energy term, it means each particle makes an independent contribution to the System energy.
  • System energy. (Note that energy terms are assumed to be symmetric with respect to the two interacting particles, and therefore are evaluated only once per pair. In contrast, expressions for computed values need not be symmetric and therefore are calculated twice for each pair: once when calculating the value for the first particle, and again when calculating the value for the second particle.)

Be aware that, although this class is extremely general in the computations it can define, particular Platforms may only support more restricted types of computations. In particular, all currently existing Platforms require that the first computed value

This is a complicated class to use, and an example may help to clarify it. The following code implements the OBC variant of the GB/SA solvation model, using the ACE approximation to estimate surface area:

CustomGBForce* custom = new CustomGBForce();
custom->addPerParticleParameter("q");
custom->addPerParticleParameter("radius");
custom->addPerParticleParameter("scale");
custom->addGlobalParameter("solventDielectric", obc->getSolventDielectric());
custom->addGlobalParameter("soluteDielectric", obc->getSoluteDielectric());
custom->addComputedValue("I", "step(r+sr2-or1)*0.5*(1/L-1/U+0.25*(1/U^2-1/L^2)*(r-sr2*sr2/r)+0.5*log(L/U)/r+C);"
                              "U=r+sr2;"
                              "C=2*(1/or1-1/L)*step(sr2-r-or1);"
                              "L=max(or1, D);"
                              "D=abs(r-sr2);"
                              "sr2 = scale2*or2;"
                              "or1 = radius1-0.009; or2 = radius2-0.009", CustomGBForce::ParticlePairNoExclusions);
custom->addComputedValue("B", "1/(1/or-tanh(1*psi-0.8*psi^2+4.85*psi^3)/radius);"
                              "psi=I*or; or=radius-0.009", CustomGBForce::SingleParticle);
custom->addEnergyTerm("28.3919551*(radius+0.14)^2*(radius/B)^6-0.5*138.935456*(1/soluteDielectric-1/solventDielectric)*q^2/B",
                      CustomGBForce::SingleParticle);
custom->addEnergyTerm("-138.935456*(1/soluteDielectric-1/solventDielectric)*q1*q2/f;"
                      "f=sqrt(r^2+B1*B2*exp(-r^2/(4*B1*B2)))", CustomGBForce::ParticlePair);

It begins by defining three per-particle parameters (charge, atomic radius, and scale factor) and two global parameters (the dielectric constants for the solute and solvent). It then defines a computed value “I” of type ParticlePair. The expression for evaluating it is a complicated function of the distance between each pair of particles (r), their atomic radii (radius1 and radius2), and their scale factors (scale1 and scale2). Very roughly speaking, it is a measure of the distance between each particle and other nearby particles.

Next a computation is defined for the Born Radius (B). It is computed independently for each particle, and is a function of that particle’s atomic radius and the intermediate value I defined above.

Finally, two energy terms are defined. The first one is computed for each particle and represents the surface area term, as well as the self interaction part of the polarization energy. The second term is calculated for each pair of particles, and represents the screening of electrostatic interactions by the solvent.

After defining the force as shown above, you should then call addParticle() once for each particle in the System to set the values of its per-particle parameters (q, radius, and scale). The number of particles for which you set parameters must be exactly equal to the number of particles in the System, or else an exception will be thrown when you try to create a Context. After a particle has been added, you can modify its parameters by calling setParticleParameters(). This will have no effect on Contexts that already exist unless you call updateParametersInContext(). CustomGBForce also lets you specify “exclusions”, particular pairs of particles whose interactions should be omitted from calculations. This is most often used for particles that are bonded to each other. Even if you specify exclusions, however, you can use the computation type ParticlePairNoExclusions to indicate that exclusions should not be applied to a particular piece of the computation.

This class also has the ability to compute derivatives of the potential energy with respect to global parameters. Call addEnergyParameterDerivative() to request that the derivative with respect to a particular parameter be computed. You can then query its value in a Context by calling getState() on it.

Expressions may involve the operators + (add), - (subtract), * (multiply), / (divide), and ^ (power), and the following functions: sqrt, exp, log, sin, cos, sec, csc, tan, cot, asin, acos, atan, sinh, cosh, tanh, erf, erfc, min, max, abs, floor, ceil, step, delta, select. All trigonometric functions are defined in radians, and log is the natural logarithm. step(x) = 0 if x is less than 0, 1 otherwise. delta(x) = 1 if x is 0, 0 otherwise. select(x,y,z) = z if x = 0, y otherwise. In expressions for particle pair calculations, the names of per-particle parameters and computed values have the suffix “1” or “2” appended to them to indicate the values for the two interacting particles. As seen in the above example, an expression may also involve intermediate quantities that are defined following the main expression, using ”;” as a separator.

In addition, you can call addTabulatedFunction() to define a new function based on tabulated values. You specify the function by creating a TabulatedFunction object. That function can then appear in expressions.

Methods

CustomGBForce Create a CustomGBForce.
~CustomGBForce
getNumParticles Get the number of particles for which force field parameters have been defined.
getNumExclusions Get the number of particle pairs whose interactions should be excluded.
getNumPerParticleParameters Get the number of per-particle parameters that the interaction depends on.
getNumGlobalParameters Get the number of global parameters that the interaction depends on.
getNumEnergyParameterDerivatives Get the number of global parameters with respect to which the derivative of the energy should be computed.
getNumTabulatedFunctions Get the number of tabulated functions that have been defined.
getNumFunctions Get the number of tabulated functions that have been defined.
getNumComputedValues Get the number of per-particle computed values the interaction depends on.
getNumEnergyTerms Get the number of terms in the energy computation.
getNonbondedMethod Get the method used for handling long range nonbonded interactions.
setNonbondedMethod Set the method used for handling long range nonbonded interactions.
getCutoffDistance Get the cutoff distance (in nm) being used for nonbonded interactions.
setCutoffDistance Set the cutoff distance (in nm) being used for nonbonded interactions.
addPerParticleParameter Add a new per-particle parameter that the interaction may depend on.
getPerParticleParameterName Get the name of a per-particle parameter.
setPerParticleParameterName Set the name of a per-particle parameter.
addGlobalParameter Add a new global parameter that the interaction may depend on.
getGlobalParameterName Get the name of a global parameter.
setGlobalParameterName Set the name of a global parameter.
getGlobalParameterDefaultValue Get the default value of a global parameter.
setGlobalParameterDefaultValue Set the default value of a global parameter.
addEnergyParameterDerivative Request that this Force compute the derivative of its energy with respect to a global parameter.
getEnergyParameterDerivativeName Get the name of a global parameter with respect to which this Force should compute the derivative of the energy.
addParticle Add the nonbonded force parameters for a particle.
getParticleParameters Get the nonbonded force parameters for a particle.
setParticleParameters Set the nonbonded force parameters for a particle.
addComputedValue Add a computed value to calculate for each particle.
getComputedValueParameters Get the properties of a computed value.
setComputedValueParameters Set the properties of a computed value.
addEnergyTerm Add a term to the energy computation.
getEnergyTermParameters Get the properties of a term to the energy computation.
setEnergyTermParameters Set the properties of a term to the energy computation.
addExclusion Add a particle pair to the list of interactions that should be excluded.
getExclusionParticles Get the particles in a pair whose interaction should be excluded.
setExclusionParticles Set the particles in a pair whose interaction should be excluded.
addTabulatedFunction Add a tabulated function that may appear in expressions.
getTabulatedFunction Get a const reference to a tabulated function that may appear in expressions.
getTabulatedFunction Get a reference to a tabulated function that may appear in expressions.
getTabulatedFunctionName Get the name of a tabulated function that may appear in expressions.
addFunction Add a tabulated function that may appear in expressions.
getFunctionParameters Get the parameters for a tabulated function that may appear in expressions.
setFunctionParameters Set the parameters for a tabulated function that may appear in expressions.
updateParametersInContext Update the per-particle parameters in a Context to match those stored in this Force object.
usesPeriodicBoundaryConditions Returns whether or not this force makes use of periodic boundary conditions.

Enum: NonbondedMethod

NoCutoff No cutoff is applied to nonbonded interactions. The full set of N^2 interactions is computed exactly. This necessarily means that periodic boundary conditions cannot be used. This is the default.
CutoffNonPeriodic Interactions beyond the cutoff distance are ignored.
CutoffPeriodic Periodic boundary conditions are used, so that each particle interacts only with the nearest periodic copy of each other particle. Interactions beyond the cutoff distance are ignored.

Enum: ComputationType

SingleParticle The value is computed independently for each particle, based only on the parameters and computed values for that particle.
ParticlePair The value is computed as a sum over all pairs of particles, except those which have been added as exclusions.
ParticlePairNoExclusions The value is computed as a sum over all pairs of particles. Unlike ParticlePair, the list of exclusions is ignored and all pairs are included in the sum, even those marked as exclusions.
CustomGBForce()

Create a CustomGBForce.

~CustomGBForce()
int getNumParticles() const

Get the number of particles for which force field parameters have been defined.

int getNumExclusions() const

Get the number of particle pairs whose interactions should be excluded.

int getNumPerParticleParameters() const

Get the number of per-particle parameters that the interaction depends on.

int getNumGlobalParameters() const

Get the number of global parameters that the interaction depends on.

int getNumEnergyParameterDerivatives() const

Get the number of global parameters with respect to which the derivative of the energy should be computed.

int getNumTabulatedFunctions() const

Get the number of tabulated functions that have been defined.

int getNumFunctions() const

Get the number of tabulated functions that have been defined.

Deprecated

This method exists only for backward compatibility. Use getNumTabulatedFunctions() instead.

int getNumComputedValues() const

Get the number of per-particle computed values the interaction depends on.

int getNumEnergyTerms() const

Get the number of terms in the energy computation.

NonbondedMethod getNonbondedMethod() const

Get the method used for handling long range nonbonded interactions.

void setNonbondedMethod(NonbondedMethod method)

Set the method used for handling long range nonbonded interactions.

double getCutoffDistance() const

Get the cutoff distance (in nm) being used for nonbonded interactions. If the NonbondedMethod in use is NoCutoff, this value will have no effect.

Returns:the cutoff distance, measured in nm
void setCutoffDistance(double distance)

Set the cutoff distance (in nm) being used for nonbonded interactions. If the NonbondedMethod in use is NoCutoff, this value will have no effect.

Parameters:
  • distance – the cutoff distance, measured in nm
int addPerParticleParameter(const std::string &name)

Add a new per-particle parameter that the interaction may depend on.

Parameters:
  • name – the name of the parameter
Returns:the index of the parameter that was added
const std::string &getPerParticleParameterName(int index) const

Get the name of a per-particle parameter.

Parameters:
  • index – the index of the parameter for which to get the name
Returns:the parameter name
void setPerParticleParameterName(int index, const std::string &name)

Set the name of a per-particle parameter.

Parameters:
  • index – the index of the parameter for which to set the name
  • name – the name of the parameter
int addGlobalParameter(const std::string &name, double defaultValue)

Add a new global parameter that the interaction may depend on.

Parameters:
  • name – the name of the parameter
  • defaultValue – the default value of the parameter
Returns:the index of the parameter that was added
const std::string &getGlobalParameterName(int index) const

Get the name of a global parameter.

Parameters:
  • index – the index of the parameter for which to get the name
Returns:the parameter name
void setGlobalParameterName(int index, const std::string &name)

Set the name of a global parameter.

Parameters:
  • index – the index of the parameter for which to set the name
  • name – the name of the parameter
double getGlobalParameterDefaultValue(int index) const

Get the default value of a global parameter.

Parameters:
  • index – the index of the parameter for which to get the default value
Returns:the parameter default value
void setGlobalParameterDefaultValue(int index, double defaultValue)

Set the default value of a global parameter.

Parameters:
  • index – the index of the parameter for which to set the default value
  • defaultValue – the default value of the parameter
void addEnergyParameterDerivative(const std::string &name)

Request that this Force compute the derivative of its energy with respect to a global parameter. The parameter must have already been added with addGlobalParameter().

Parameters:
  • name – the name of the parameter
const std::string &getEnergyParameterDerivativeName(int index) const

Get the name of a global parameter with respect to which this Force should compute the derivative of the energy.

Parameters:
Returns:the parameter name
int addParticle(const std::vector<double> &parameters = std::vector< double >())

Add the nonbonded force parameters for a particle. This should be called once for each particle in the System. When it is called for the i’th time, it specifies the parameters for the i’th particle.

Parameters:
  • parameters – the list of parameters for the new particle
Returns:the index of the particle that was added
void getParticleParameters(int index, std::vector<double> &parameters) const

Get the nonbonded force parameters for a particle.

Parameters:
  • index – the index of the particle for which to get parameters
  • parameters – [out] the list of parameters for the specified particle
void setParticleParameters(int index, const std::vector<double> &parameters)

Set the nonbonded force parameters for a particle.

Parameters:
  • index – the index of the particle for which to set parameters
  • parameters – the list of parameters for the specified particle
int addComputedValue(const std::string &name, const std::string &expression, ComputationType type)

Add a computed value to calculate for each particle.

Parameters:
  • name – the name of the value
  • expression – an algebraic expression to evaluate when calculating the computed value. If the ComputationType is SingleParticle, the expression is evaluated independently for each particle, and may depend on its x, y, and z coordinates, as well as the per-particle parameters and previous computed values for that particle. If the ComputationType is ParticlePair or ParticlePairNoExclusions, the expression is evaluated once for every other particle in the system and summed to get the final value. In the latter case, the expression may depend on the distance r between the two particles, and on the per-particle parameters and previous computed values for each of them. Append “1” to a variable name to indicate the parameter for the particle whose value is being calculated, and “2” to indicate the particle it is interacting with.
  • type – the method to use for computing this value
void getComputedValueParameters(int index, std::string &name, std::string &expression, ComputationType &type) const

Get the properties of a computed value.

Parameters:
  • index – the index of the computed value for which to get parameters
  • name – [out] the name of the value
  • expression – [out] an algebraic expression to evaluate when calculating the computed value. If the ComputationType is SingleParticle, the expression is evaluated independently for each particle, and may depend on its x, y, and z coordinates, as well as the per-particle parameters and previous computed values for that particle. If the ComputationType is ParticlePair or ParticlePairNoExclusions, the expression is evaluated once for every other particle in the system and summed to get the final value. In the latter case, the expression may depend on the distance r between the two particles, and on the per-particle parameters and previous computed values for each of them. Append “1” to a variable name to indicate the parameter for the particle whose value is being calculated, and “2” to indicate the particle it is interacting with.
  • type – [out] the method to use for computing this value
void setComputedValueParameters(int index, const std::string &name, const std::string &expression, ComputationType type)

Set the properties of a computed value.

Parameters:
  • index – the index of the computed value for which to set parameters
  • name – the name of the value
  • expression – an algebraic expression to evaluate when calculating the computed value. If the ComputationType is SingleParticle, the expression is evaluated independently for each particle, and may depend on its x, y, and z coordinates, as well as the per-particle parameters and previous computed values for that particle. If the ComputationType is ParticlePair or ParticlePairNoExclusions, the expression is evaluated once for every other particle in the system and summed to get the final value. In the latter case, the expression may depend on the distance r between the two particles, and on the per-particle parameters and previous computed values for each of them. Append “1” to a variable name to indicate the parameter for the particle whose value is being calculated, and “2” to indicate the particle it is interacting with.
  • type – the method to use for computing this value
int addEnergyTerm(const std::string &expression, ComputationType type)

Add a term to the energy computation.

Parameters:
  • expression – an algebraic expression to evaluate when calculating the energy. If the ComputationType is SingleParticle, the expression is evaluated once for each particle, and may depend on its x, y, and z coordinates, as well as the per-particle parameters and computed values for that particle. If the ComputationType is ParticlePair or ParticlePairNoExclusions, the expression is evaluated once for every pair of particles in the system. In the latter case, the expression may depend on the distance r between the two particles, and on the per-particle parameters and computed values for each of them. Append “1” to a variable name to indicate the parameter for the first particle in the pair and “2” to indicate the second particle in the pair.
  • type – the method to use for computing this value
void getEnergyTermParameters(int index, std::string &expression, ComputationType &type) const

Get the properties of a term to the energy computation.

Parameters:
  • index – the index of the term for which to get parameters
  • expression – [out] an algebraic expression to evaluate when calculating the energy. If the ComputationType is SingleParticle, the expression is evaluated once for each particle, and may depend on its x, y, and z coordinates, as well as the per-particle parameters and computed values for that particle. If the ComputationType is ParticlePair or ParticlePairNoExclusions, the expression is evaluated once for every pair of particles in the system. In the latter case, the expression may depend on the distance r between the two particles, and on the per-particle parameters and computed values for each of them. Append “1” to a variable name to indicate the parameter for the first particle in the pair and “2” to indicate the second particle in the pair.
  • type – [out] the method to use for computing this value
void setEnergyTermParameters(int index, const std::string &expression, ComputationType type)

Set the properties of a term to the energy computation.

Parameters:
  • index – the index of the term for which to set parameters
  • expression – an algebraic expression to evaluate when calculating the energy. If the ComputationType is SingleParticle, the expression is evaluated once for each particle, and may depend on its x, y, and z coordinates, as well as the per-particle parameters and computed values for that particle. If the ComputationType is ParticlePair or ParticlePairNoExclusions, the expression is evaluated once for every pair of particles in the system. In the latter case, the expression may depend on the distance r between the two particles, and on the per-particle parameters and computed values for each of them. Append “1” to a variable name to indicate the parameter for the first particle in the pair and “2” to indicate the second particle in the pair.
  • type – the method to use for computing this value
int addExclusion(int particle1, int particle2)

Add a particle pair to the list of interactions that should be excluded.

Parameters:
  • particle1 – the index of the first particle in the pair
  • particle2 – the index of the second particle in the pair
Returns:the index of the exclusion that was added
void getExclusionParticles(int index, int &particle1, int &particle2) const

Get the particles in a pair whose interaction should be excluded.

Parameters:
  • index – the index of the exclusion for which to get particle indices
  • particle1 – [out] the index of the first particle in the pair
  • particle2 – [out] the index of the second particle in the pair
void setExclusionParticles(int index, int particle1, int particle2)

Set the particles in a pair whose interaction should be excluded.

Parameters:
  • index – the index of the exclusion for which to set particle indices
  • particle1 – the index of the first particle in the pair
  • particle2 – the index of the second particle in the pair
int addTabulatedFunction(const std::string &name, TabulatedFunction *function)

Add a tabulated function that may appear in expressions.

Parameters:
  • name – the name of the function as it appears in expressions
  • function – a TabulatedFunction object defining the function. The TabulatedFunction should have been created on the heap with the “new” operator. The Force takes over ownership of it, and deletes it when the Force itself is deleted.
Returns:the index of the function that was added
const TabulatedFunction &getTabulatedFunction(int index) const

Get a const reference to a tabulated function that may appear in expressions.

Parameters:
  • index – the index of the function to get
Returns:the TabulatedFunction object defining the function
TabulatedFunction &getTabulatedFunction(int index)

Get a reference to a tabulated function that may appear in expressions.

Parameters:
  • index – the index of the function to get
Returns:the TabulatedFunction object defining the function
const std::string &getTabulatedFunctionName(int index) const

Get the name of a tabulated function that may appear in expressions.

Parameters:
  • index – the index of the function to get
Returns:the name of the function as it appears in expressions
int addFunction(const std::string &name, const std::vector<double> &values, double min, double max)

Add a tabulated function that may appear in expressions.

Deprecated

This method exists only for backward compatibility. Use addTabulatedFunction() instead.

void getFunctionParameters(int index, std::string &name, std::vector<double> &values, double &min, double &max) const

Get the parameters for a tabulated function that may appear in expressions.

Deprecated

This method exists only for backward compatibility. Use getTabulatedFunctionParameters() instead. If the specified function is not a Continuous1DFunction, this throws an exception.

void setFunctionParameters(int index, const std::string &name, const std::vector<double> &values, double min, double max)

Set the parameters for a tabulated function that may appear in expressions.

Deprecated

This method exists only for backward compatibility. Use setTabulatedFunctionParameters() instead. If the specified function is not a Continuous1DFunction, this throws an exception.

void updateParametersInContext(Context &context)

Update the per-particle parameters in a Context to match those stored in this Force object. This method provides an efficient method to update certain parameters in an existing Context without needing to reinitialize it. Simply call setParticleParameters() to modify this object’s parameters, then call updateParametersInContext() to copy them over to the Context.

This method has several limitations. The only information it updates is the values of per-particle parameters. All other aspects of the Force (such as the energy function) are unaffected and can only be changed by reinitializing the Context. Also, this method cannot be used to add new particles, only to change the parameters of existing ones.

bool usesPeriodicBoundaryConditions() const

Returns whether or not this force makes use of periodic boundary conditions.

Returns:true if force uses PBC and false otherwise