NoseHooverChain¶
-
class
OpenMM
::
NoseHooverChain
¶ This class defines a chain of Nose-Hoover particles to be used as a heat bath to scale the velocities of a collection of particles subject to thermostating. The heat bath is propagated using the multi time step approach detailed in
Martyna, M. E. Tuckerman, D. J. Tobias and M. L. Klein, Mol. Phys. 87, 1117 (1996).
where the total number of timesteps used to propagate the chain in each step is the number of MTS steps multiplied by the number of terms in the Yoshida-Suzuki decomposition.
Two types of NHC may be created. The first is a simple thermostat that couples with a given subset of the atoms within a system, controling their absolute motion. The second is more elaborate and can thermostat tethered pairs of atoms and in this case two thermostats are created: one that controls the absolute center of mass velocity of each pair and another that controls their motion relative to one another.
Methods
Create a
NoseHooverChain
.Get the temperature of the heat bath for treating absolute particle motion (in Kelvin).
Set the temperature of the heat bath for treating absolute particle motion.
Get the temperature of the heat bath for treating relative particle motion (in Kelvin).
Set the temperature of the heat bath for treating relative motion if this thermostat has been set up to treat connected pairs of atoms.
Get the collision frequency for treating absolute particle motion (in 1/ps).
Set the collision frequency for treating absolute particle motion.
Get the collision frequency for treating relative particle motion (in 1/ps).
Set the collision frequency for treating relative particle motion if this thermostat has been set up to handle connected pairs of atoms.
Get the number of degrees of freedom in the particles controled by this heat bath.
Set the number of degrees of freedom in the particles controled by this heat bath.
Get the chain length of this heat bath.
Get the number of steps used in the multi time step propagation.
Get the number of steps used in the Yoshida-Suzuki decomposition for multi time step propagation.
Get the chain id used to identify this chain
Get the atom ids of all atoms that are thermostated
Set list of atoms that are handled by this thermostat
Get the list of any connected pairs to be handled by this thermostat.
In case this thermostat handles the kinetic energy of Drude particles set the atom IDs of all parent atoms.
Get the weights used in the Yoshida Suzuki multi time step decomposition (dimensionless)
Returns whether or not this force makes use of periodic boundary conditions.
-
NoseHooverChain
(double temperature, double relativeTemperature, double collisionFrequency, double relativeCollisionFrequency, int numDOFs, int chainLength, int numMTS, int numYoshidaSuzuki, int chainID, const std::vector<int> &thermostatedAtoms, const std::vector<std::pair<int, int>> &thermostatedPairs)¶ Create a
NoseHooverChain()
.- Parameters
temperature – the temperature of the heat bath for absolute motion (in Kelvin)
collisionFrequency – the collision frequency for absolute motion (in 1/ps)
relativeTemperature – the temperature of the heat bath for relative motion(in Kelvin). This is only used if the list of thermostated pairs is not empty.
relativeCollisionFrequency – the collision frequency for relative motion(in 1/ps). This is only used if the list of thermostated pairs is not empty.
numDOFs – the number of degrees of freedom in the particles that interact with this chain
chainLength – the length of (number of particles in) this heat bath
numMTS – the number of multi time steps used to propagate this chain
numYoshidaSuzuki – the number of Yoshida Suzuki steps used to propagate this chain (1, 3, 5, or 7).
chainID – the chain id used to distinguish this Nose-Hoover chain from others that may be used to control a different set of particles, e.g. for Drude oscillators
thermostatedAtoms – the list of atoms to be handled by this thermostat
thermostatedPairs – the list of connected pairs to be thermostated; their absolute center of mass motion will be thermostated independently from their motion relative to one another.
-
double
getTemperature
() const¶ Get the temperature of the heat bath for treating absolute particle motion (in Kelvin).
- Returns
the temperature of the heat bath, measured in Kelvin.
-
void
setTemperature
(double temperature)¶ Set the temperature of the heat bath for treating absolute particle motion. This will affect any new Contexts you create, but not ones that already exist.
- Parameters
temperature – the temperature of the heat bath (in Kelvin)
-
double
getRelativeTemperature
() const¶ Get the temperature of the heat bath for treating relative particle motion (in Kelvin).
- Returns
the temperature of the heat bath, measured in Kelvin.
-
void
setRelativeTemperature
(double temperature)¶ Set the temperature of the heat bath for treating relative motion if this thermostat has been set up to treat connected pairs of atoms. This will affect any new Contexts you create, but not ones that already exist.
- Parameters
temperature – the temperature of the heat bath for relative motion (in Kelvin)
-
double
getCollisionFrequency
() const¶ Get the collision frequency for treating absolute particle motion (in 1/ps).
- Returns
the collision frequency, measured in 1/ps.
-
void
setCollisionFrequency
(double frequency)¶ Set the collision frequency for treating absolute particle motion. This will affect any new Contexts you create, but not those that already exist.
- Parameters
frequency – the collision frequency (in 1/ps)
-
double
getRelativeCollisionFrequency
() const¶ Get the collision frequency for treating relative particle motion (in 1/ps).
- Returns
the collision frequency, measured in 1/ps.
-
void
setRelativeCollisionFrequency
(double frequency)¶ Set the collision frequency for treating relative particle motion if this thermostat has been set up to handle connected pairs of atoms. This will affect any new Contexts you create, but not those that already exist.
- Parameters
frequency – the collision frequency (in 1/ps)
-
int
getNumDegreesOfFreedom
() const¶ Get the number of degrees of freedom in the particles controled by this heat bath.
- Returns
the number of degrees of freedom.
-
void
setNumDegreesOfFreedom
(int numDOF)¶ Set the number of degrees of freedom in the particles controled by this heat bath. This will affect any new Contexts you create, but not those that already exist.
- Parameters
numDOF – the number of degrees of freedom.
-
int
getChainLength
() const¶ Get the chain length of this heat bath.
- Returns
the chain length.
-
int
getNumMultiTimeSteps
() const¶ Get the number of steps used in the multi time step propagation.
- Returns
the number of multi time steps.
-
int
getNumYoshidaSuzukiTimeSteps
() const¶ Get the number of steps used in the Yoshida-Suzuki decomposition for multi time step propagation.
- Returns
the number of multi time steps in the Yoshida-Suzuki decomposition.
-
int
getChainID
() const¶ Get the chain id used to identify this chain
- Returns
the chain id
-
const std::vector<int> &
getThermostatedAtoms
() const¶ Get the atom ids of all atoms that are thermostated
- Returns
ids of all atoms that are being handled by this thermostat
-
void
setThermostatedAtoms
(const std::vector<int> &atomIDs)¶ Set list of atoms that are handled by this thermostat
- Parameters
atomIDs –
-
const std::vector<std::pair<int, int>> &
getThermostatedPairs
() const¶ Get the list of any connected pairs to be handled by this thermostat. If this is a regular thermostat, returns an empty vector.
- Returns
list of connected pairs.
-
void
setThermostatedPairs
(const std::vector<std::pair<int, int>> &pairIDs)¶ In case this thermostat handles the kinetic energy of Drude particles set the atom IDs of all parent atoms.
- Parameters
pairIDs – the list of connected pairs to thermostat.
-
std::vector<double>
getYoshidaSuzukiWeights
() const¶ Get the weights used in the Yoshida Suzuki multi time step decomposition (dimensionless)
- Returns
the weights for the Yoshida-Suzuki integration
-
bool
usesPeriodicBoundaryConditions
() const¶ Returns whether or not this force makes use of periodic boundary conditions.
- Returns
true if force uses PBC and false otherwise