19. Custom Forces¶
In addition to the standard forces described in the previous chapter, OpenMM provides a number of “custom” force classes. These classes provide detailed control over the mathematical form of the force by allowing the user to specify one or more arbitrary algebraic expressions. The details of how to write these custom expressions are described in section 19.12.
19.1. CustomBondForce¶
CustomBondForce is similar to HarmonicBondForce in that it represents an interaction between certain pairs of particles as a function of the distance between them, but it allows the precise form of the interaction to be specified by the user. That is, the interaction energy of each bond is given by
where f(r) is a user defined mathematical expression.
In addition to depending on the inter-particle distance r, the energy may also depend on an arbitrary set of user defined parameters. Parameters may be specified in two ways:
Global parameters have a single, fixed value.
Per-bond parameters are defined by specifying a value for each bond.
19.2. CustomAngleForce¶
CustomAngleForce is similar to HarmonicAngleForce in that it represents an interaction between sets of three particles as a function of the angle between them, but it allows the precise form of the interaction to be specified by the user. That is, the interaction energy of each angle is given by
where \(f(\theta)\) is a user defined mathematical expression.
In addition to depending on the angle \(\theta\), the energy may also depend on an arbitrary set of user defined parameters. Parameters may be specified in two ways:
Global parameters have a single, fixed value.
Per-angle parameters are defined by specifying a value for each angle.
19.3. CustomTorsionForce¶
CustomTorsionForce is similar to PeriodicTorsionForce in that it represents an interaction between sets of four particles as a function of the dihedral angle between them, but it allows the precise form of the interaction to be specified by the user. That is, the interaction energy of each angle is given by
where \(f(\theta)\) is a user defined mathematical expression. The angle \(\theta\) is guaranteed to be in the range \([-\pi, +\pi]\). Like PeriodicTorsionForce, it is defined to be zero when the first and last particles are on the same side of the bond formed by the middle two particles (the cis configuration).
In addition to depending on the angle \(\theta\), the energy may also depend on an arbitrary set of user defined parameters. Parameters may be specified in two ways:
Global parameters have a single, fixed value.
Per-torsion parameters are defined by specifying a value for each torsion.
19.4. CustomNonbondedForce¶
CustomNonbondedForce is similar to NonbondedForce in that it represents a pairwise interaction between all particles in the System, but it allows the precise form of the interaction to be specified by the user. That is, the interaction energy between each pair of particles is given by
where f(r) is a user defined mathematical expression.
In addition to depending on the inter-particle distance r, the energy may also depend on an arbitrary set of user defined parameters. Parameters may be specified in two ways:
Global parameters have a single, fixed value.
Per-particle parameters are defined by specifying a value for each particle.
A CustomNonbondedForce can optionally be restricted to only a subset of particle pairs in the System. This is done by defining “interaction groups”. See the API documentation for details.
When using a cutoff, a switching function can optionally be applied to make the energy go smoothly to 0 at the cutoff distance. When \(r_\mathit{switch} < r < r_\mathit{cutoff}\), the energy is multiplied by
where \(x=(r-r_\mathit{switch})/(r_\mathit{cutoff}-r_\mathit{switch})\). This function decreases smoothly from 1 at \(r=r_\mathit{switch}\) to 0 at \(r=r_\mathit{cutoff}\), and has continuous first and second derivatives at both ends.
When using periodic boundary conditions, CustomNonbondedForce can optionally add a term (known as a long range truncation correction) to the energy that approximately represents the contribution from all interactions beyond the cutoff distance:[42]
where N is the number of particles in the system, V is the volume of the periodic box, and \(\langle \text{...} \rangle\) represents an average over all pairs of particles in the system. When a switching function is in use, there is an additional contribution to the correction given by
The long range dispersion correction is primarily useful when running simulations at constant pressure, since it produces a more accurate variation in system energy with respect to volume.
19.5. CustomExternalForce¶
CustomExternalForce represents a force that is applied independently to each particle as a function of its position. That is, the energy of each particle is given by
where f(x, y, z) is a user defined mathematical expression.
In addition to depending on the particle’s (x, y, z) coordinates, the energy may also depend on an arbitrary set of user defined parameters. Parameters may be specified in two ways:
Global parameters have a single, fixed value.
Per-particle parameters are defined by specifying a value for each particle.
19.6. CustomCompoundBondForce¶
CustomCompoundBondForce supports a wide variety of bonded interactions. It defines a “bond” as a single energy term that depends on the positions of a fixed set of particles. The number of particles involved in a bond, and how the energy depends on their positions, is configurable. It may depend on the positions of individual particles, the distances between pairs of particles, the angles formed by sets of three particles, and the dihedral angles formed by sets of four particles. That is, the interaction energy of each bond is given by
where f(…) is a user defined mathematical expression. It may depend on an arbitrary set of positions {\(x_i\)}, distances {\(r_i\)}, angles {\(\theta_i\)}, and dihedral angles {\(\phi_i\)} guaranteed to be in the range \([-\pi, +\pi]\).
Each distance, angle, or dihedral is defined by specifying a sequence of particles chosen from among the particles that make up the bond. A distance variable is defined by two particles, and equals the distance between them. An angle variable is defined by three particles, and equals the angle between them. A dihedral variable is defined by four particles, and equals the angle between the first and last particles about the axis formed by the middle two particles. It is equal to zero when the first and last particles are on the same side of the axis.
In addition to depending on positions, distances, angles, and dihedrals, the energy may also depend on an arbitrary set of user defined parameters. Parameters may be specified in two ways:
Global parameters have a single, fixed value.
Per-bond parameters are defined by specifying a value for each bond.
19.7. CustomCentroidBondForce¶
CustomCentroidBondForce is very similar to CustomCompoundBondForce, but instead of creating bonds between individual particles, the bonds are between the centers of groups of particles. This is useful for purposes such as restraining the distance between two molecules or pinning the center of mass of a single molecule.
The first step in computing this force is to calculate the center position of each defined group of particles. This is calculated as a weighted average of the positions of all the particles in the group, with the weights being user defined. The computation then proceeds exactly as with CustomCompoundBondForce, but the energy of each “bond” is now calculated based on the centers of a set of groups, rather than on the positions of individual particles.
This class supports all the same function types and features as CustomCompoundBondForce. In fact, any interaction that could be implemented with CustomCompoundBondForce can also be implemented with this class, simply by defining each group to contain only a single atom.
19.8. CustomManyParticleForce¶
CustomManyParticleForce is similar to CustomNonbondedForce in that it represents a custom nonbonded interaction between particles, but it allows the interaction to depend on more than two particles. This allows it to represent a wide range of non-pairwise interactions. It is defined by specifying the number of particles \(N\) involved in the interaction and how the energy depends on their positions. More specifically, it takes a user specified energy function
that may depend on an arbitrary set of positions {\(x_i\)}, distances {\(r_i\)}, angles {\(\theta_i\)}, and dihedral angles {\(\phi_i\)} from a particular set of \(N\) particles.
Each distance, angle, or dihedral is defined by specifying a sequence of particles chosen from among the particles in the set. A distance variable is defined by two particles, and equals the distance between them. An angle variable is defined by three particles, and equals the angle between them. A dihedral variable is defined by four particles, and equals the angle between the first and last particles about the axis formed by the middle two particles. It is equal to zero when the first and last particles are on the same side of the axis.
In addition to depending on positions, distances, angles, and dihedrals, the energy may also depend on an arbitrary set of user defined parameters. Parameters may be specified in two ways:
Global parameters have a single, fixed value.
Per-particle parameters are defined by specifying a value for each particle.
The energy function is evaluated one or more times for every unique set of
\(N\) particles in the system. The exact number of times depends on the
permutation mode. A set of \(N\) particles has \(N!\) possible
permutations. In SinglePermutation mode, the function is evaluated
for a single arbitrarily chosen one of those permutations. In
UniqueCentralParticle mode, the function is evaluated for \(N\) of
those permutations, once with each particle as the “central particle”.
The number of times the energy function is evaluated can be further restricted by specifying type filters. Each particle may have a “type” assigned to it, and then each of the \(N\) particles involved in an interaction may be restricted to only a specified set of types. This provides a great deal of flexibility in controlling which particles interact with each other.
19.9. CustomGBForce¶
CustomGBForce implements complex, multiple stage nonbonded interactions between particles. It is designed primarily for implementing Generalized Born implicit solvation models, although it is not strictly limited to that purpose.
The interaction is specified as a series of computations, each defined by an arbitrary algebraic expression. These computations consist of some number of per-particle computed values, followed by one or more energy terms. A computed value is a scalar value that is computed for each particle in the system. It may depend on an arbitrary set of global and per-particle parameters, and well as on other computed values that have been calculated before it. Once all computed values have been calculated, the energy terms and their derivatives are evaluated to determine the system energy and particle forces. The energy terms may depend on global parameters, per-particle parameters, and per-particle computed values.
Computed values can be calculated in two different ways:
Single particle values are calculated by evaluating a user defined expression for each particle:
where f(…) may depend only on properties of particle i (its coordinates and parameters, as well as other computed values that have already been calculated).
Particle pair values are calculated as a sum over pairs of particles:
where the sum is over all other particles in the System, and f(r, …) is a function of the distance r between particles i and j, as well as their parameters and computed values.
Energy terms may similarly be calculated per-particle or per-particle-pair.
Single particle energy terms are calculated by evaluating a user defined expression for each particle:
where f(…) may depend only on properties of that particle (its coordinates, parameters, and computed values).
Particle pair energy terms are calculated by evaluating a user defined expression once for every pair of particles in the System:
where the sum is over all particle pairs i < j, and f(r, …) is a function of the distance r between particles i and j, as well as their parameters and computed values.
Note that energy terms are assumed to be symmetric with respect to the two interacting particles, and therefore are evaluated only once per pair. In contrast, expressions for computed values need not be symmetric and therefore are calculated twice for each pair: once when calculating the value for the first particle, and again when calculating the value for the second particle.
Be aware that, although this class is extremely general in the computations it can define, particular Platforms may only support more restricted types of computations. In particular, all currently existing Platforms require that the first computed value must be a particle pair computation, and all computed values after the first must be single particle computations. This is sufficient for most Generalized Born models, but might not permit some other types of calculations to be implemented.
19.10. CustomHbondForce¶
CustomHbondForce supports a wide variety of energy functions used to represent hydrogen bonding. It computes interactions between “donor” particle groups and “acceptor” particle groups, where each group may include up to three particles. Typically a donor group consists of a hydrogen atom and the atoms it is bonded to, and an acceptor group consists of a negatively charged atom and the atoms it is bonded to. The interaction energy between each donor group and each acceptor group is given by
where f(…) is a user defined mathematical expression. It may depend on an arbitrary set of distances {\(r_i\)}, angles {\(\theta_i\)}, and dihedral angles {\(\phi_i\)}.
Each distance, angle, or dihedral is defined by specifying a sequence of particles chosen from the interacting donor and acceptor groups (up to six atoms to choose from, since each group may contain up to three atoms). A distance variable is defined by two particles, and equals the distance between them. An angle variable is defined by three particles, and equals the angle between them. A dihedral variable is defined by four particles, and equals the angle between the first and last particles about the axis formed by the middle two particles. It is equal to zero when the first and last particles are on the same side of the axis.
In addition to depending on distances, angles, and dihedrals, the energy may also depend on an arbitrary set of user defined parameters. Parameters may be specified in three ways:
Global parameters have a single, fixed value.
Per-donor parameters are defined by specifying a value for each donor group.
Per-acceptor parameters are defined by specifying a value for each acceptor group.
19.11. CustomCVForce¶
CustomCVForce computes an energy as a function of “collective variables”. A
collective variable may be any scalar valued function of the particle positions
and other parameters. Each one is defined by a Force object, so any
function that can be defined via any force class (either standard or custom) can
be used as a collective variable. The energy is then computed as
where f(…) is a user supplied mathematical expression of the collective variables. It also may depend on user defined global parameters.
19.12. Writing Custom Expressions¶
The custom forces described in this chapter involve user defined algebraic expressions. These expressions are specified as character strings, and may involve a variety of standard operators and mathematical functions.
The following operators are supported: + (add), - (subtract), * (multiply), / (divide), and ^ (power). Parentheses “(“ and “)” may be used for grouping.
The following standard functions are supported: sqrt, exp, log, sin, cos, sec, csc, tan, cot, asin, acos, atan, atan2, sinh, cosh, tanh, erf, erfc, min, max, abs, floor, ceil, step, delta, select. step(x) = 0 if x < 0, 1 otherwise. delta(x) = 1 if x is 0, 0 otherwise. select(x,y,z) = z if x = 0, y otherwise. Some custom forces allow additional functions to be defined from tabulated values.
Numbers may be given in either decimal or exponential form. All of the following are valid numbers: 5, -3.1, 1e6, and 3.12e-2.
The variables that may appear in expressions are specified in the API documentation for each force class. In addition, an expression may be followed by definitions for intermediate values that appear in the expression. A semicolon “;” is used as a delimiter between value definitions. For example, the expression
a^2+a*b+b^2; a=a1+a2; b=b1+b2
is exactly equivalent to
(a1+a2)^2+(a1+a2)*(b1+b2)+(b1+b2)^2
The definition of an intermediate value may itself involve other intermediate values. All uses of a value must appear before that value’s definition.
19.13. Setting Parameters¶
Most custom forces have two types of parameters you can define. The simplest type
are global parameters, which represent a single number. The value is stored in
the Context, and can be changed at any time by calling setParameter()
on it. Global parameters are designed to be very inexpensive to change. Even if
you set a new value for a global parameter on every time step, the overhead will
usually be quite small. There can be exceptions to this rule, however. For
example, if a CustomNonbondedForce uses a long range correction, changing
a global parameter may require the correction coefficient to be recalculated,
which is expensive.
The other type of parameter is ones that record many values, one for each element
of the force, such as per-particle or per-bond parameters. These values are stored
directly in the force object itself, and hence are part of the system definition.
When a Context is created, the values are copied over to it, and thereafter
the two are disconnected. Modifying the force will have no effect on any
Context that already exists.
Some forces do provide a way to modify these parameters via an updateParametersInContext()
method. These methods tend to be somewhat expensive, so it is best not to call
them too often. On the other hand, they are still much less expensive than calling
reinitialize() on the Context, which is the other way of updating
the system definition for a running simulation.
19.14. Parameter Derivatives¶
Many custom forces have the ability to compute derivatives of the potential energy
with respect to global parameters. To use this feature, first define a global
parameter that the energy depends on. Then instruct the custom force to compute
the derivative with respect to that parameter by calling addEnergyParameterDerivative()
on it. Whenever forces and energies are computed, the specified derivative will
then also be computed at the same time. You can query it by calling getState()
on a Context, just as you would query forces or energies.
An important application of this feature is to use it in combination with a
CustomIntegrator (described in section 20.8). The
derivative can appear directly in expressions that define the integration
algorithm. This can be used to implement algorithms such as lambda-dynamics,
where a global parameter is integrated as a dynamic variable.
